difficulty 1-10: 7

tools needed:
hydraulic jack
4 jackstands (or lift)
flathead screwdriver
10mm box wrench
11mm box wrench
14m triple square bit
8mm allen bit or 50mm torx bit
ratcheting wrench
large bucket or container for old brake fluid

remove wheels and place jack stands on frame of the car



use the 14m triple square bit to remove the calipers



there are two of these at each caliper (front only) now remove the brakeline retainer pin (U-shape)



pry it off with a flathead





pry off the plastic brake sensor wire retainer



sorry still editing, will finish soon.