Planet 9

jamespson · #1 04-29-2007, 08:50 PM

Hi Folks. Does anyone have a good reccomendation for a good clear bra installer in Washington? I guess I'm getting tired of fixing paint chips every month from the roads around here...

I do go up to Vancouver quite often, and any reccomendations up there would be good as well.

Thanks!

ploc36 · #2 04-29-2007, 09:14 PM

Haven't been able to locate a clear bra installer here in the Pacific North West? I will be contacting Weissach Vancouver sometime this week to see if they know. Will alert everyone in Zone 6 when i get more info.

**K-Man S** · #3 04-29-2007, 10:52 PM

What about our sponsor Premier?

jamespson · #4 04-30-2007, 12:06 PM

Sorry.. I'm probably daft but there are a bunch of sponsors. The Invinci-guys are a bit far

cet001 · #5 05-08-2007, 02:08 PM

I had Accutint in Bellevue, WA install the 3M protection 6 months ago on my '05 Corvette. They did a great job and a really nice group of people. They deal mainly in high-end vehicles. I would highly recommend them.

**K-Man S** · #6 05-08-2007, 02:48 PM

Originally Posted by jamespson

Sorry.. I'm probably daft but there are a bunch of sponsors. The Invinci-guys are a bit far

Premier Mobile, they are based in California but travel up and down the west coast to do installs, their information is on the sponsor page as well as they post from time to time in the sponsor forum and zone 8 forum.

waltk88 · #7 05-09-2007, 09:35 PM

Originally Posted by cet001

I had Accutint in Bellevue, WA install the 3M protection 6 months ago on my '05 Corvette. They did a great job and a really nice group of people. They deal mainly in high-end vehicles. I would highly recommend them.

I second the recommendation for Accutint. They did a great job on my S2000. If it's good enough for a Carrera GT...

jamespson · #8 05-23-2007, 11:24 PM

Hi guys thanks for all the tips. I called the guys at Accutint and Nathan was extremely nice. In the end, however, I chose a shop that did a full hood wrap. Apparently 3M doesn't make full hood material. I ended up using Venture Shield stuff.

I did a lot of research from about 10 or so clear-bra installers around Seattle, Bellevue, etc. If anyone has any questions feel free to PM me.

Found a good installer in Seattle that did the full-hood wrap + bumper, etc. at a reasonable price. His runs a small shop called NW Autoshield. My only regret was not doing it a year ago

Oh well live and learn.

**lawrence** · #9 06-21-2007, 12:20 AM

Ploc36 & everyone

FYI, I have found out a place in Vancouver that does 3M clear bra.

Downtown Auto Spa Inc. Vancouver Canada

Cheers

ploc36 · #10 06-21-2007, 06:50 AM

Thanks lawrance. I will check them out today & report back.

ploc36 · #11 06-21-2007, 10:37 AM

OK, here's the deal: Vancouver Auto Spa have done many of these install, check out their web site in the above link (lawrance post). They have worked on Lambos, Lotus, & Porsches for Weissach. The cost is as follows:

Edge to edge coverage:
Full, include Hood, side mirrors, fenders, & gas cap . $999.95 installed

Wrap around coverage:

Hood: $499.95
Driver's fender: $259.95
Passenger fender: $269.95
Rocker Panel & Wheel openings: $249.95
Head Light Kit: 99.95

Bumper Kit is on top of the above quotes:
$609.95

All 3M materials, DOT approved, 5 year warranty.

Wonder if they want to be a sponsor?

**SF Cfan** · #12 06-27-2007, 09:12 PM

Originally Posted by cet001

I had Accutint in Bellevue, WA install the 3M protection 6 months ago on my '05 Corvette. They did a great job and a really nice group of people. They deal mainly in high-end vehicles. I would highly recommend them.

Originally Posted by waltk88

I second the recommendation for Accutint. They did a great job on my S2000. If it's good enough for a Carrera GT...

Thanks for the recommend; Accutint put the clear bra on my Cayman today. I got to see their handy work on the Boxster of one of our local PCA members a couple of weeks ago too. They do quite a complete job. I'm very pleased with the results.