Planet-9 Porsche Forum banner
intake
1-19 of 52 Results
  1. 987 Cayman and Boxster Modifications
    Partially out of lock-down boredom and partly to see if I could feel any improvements, I wanted to try removing the baffle plate on my 987 s. Once it was out it looked useful in terms of keeping dirt and spray out of the aperture (there is a gutter that seems to channel water towards the drain...
  2. Planet-9 Classifieds
    Selling my IPD Competition Plenum (P/N: IPD-87482) with 82MM GT3 throttle body for the 987.2 Cayman S (2009-2012). It is used and was installed by the previous owner of my car. He put a total of 10K on the car, so it has somewhere between 1k-10K miles on it. No known issues at the time of...
  3. 987 Cayman and Boxster Chat
    I had oil in my Plenum and intake but im wondering how much is too much, or should there be any at all if the AOS is working properly? I have a new IOS ordered.. Was it a waste of money? There was a pool in my IPD Plenum covering all the dimples in the bottom of the plenum and there was some...
  4. 987 Cayman and Boxster Service and Tech
    Have 2006 987 base with 2.7L. Removed throttle body to clean. The small vacuum hose that goes to the vacuum unit attached to the underside of the intake distribution pipe accidentally pulled free from the other end and I'm unsure where that might me. The service manual I was using indicated I...
  5. 981 Cayman GT4 Chat
    Any new news on the GT3 intake and throttle body? I was looking forward to that as the last piece needed to bring the motor up to its potential along with my Cargraphic headers. I checked the TPC website and did a web search but couldn't find anything. David
  6. Vendor Deals
    We are offering discounts on select components just in time for spring cruising, there is something for everyone! Check out the full list of Porsche sale items here. For other makes, just browse are website as the special is not just limited to Porsche. If you place an order on our website, be...
  7. Pistol Petes Boxster Board
    We are offering discounts on select components just in time for spring cruising. This includes our 986 Jack Point and Vflow Intake System! Check out the full list of sale items here. If you place an order on our website, be sure to select John Gaydos as your rep so the order comes across my...
  8. 987 Cayman and Boxster Modifications
    We are offering discounts on select components just in time for spring cruising. This includes our 987.1/987.2 Deluxe Bolt-On Tips and Jack Points, and our 987.2 Competition Air Intake System! Check out the full list of sale items here. If you place an order on our website, be sure to select...
  9. 987 Cayman and Boxster Modifications
    Everyone I need help here. I painted my intake manifolds and there is a port and wire that appears not to be connected, although I do not remember disconnecting them. First i have a 2007 Base Cayman, In the first picture there is a small port right above the text "Here". It is a part of the...
  10. 981 Cayman and Boxster Problems and Complaints
    Took my Spyder out for the final ride of the season, lots of leaves on the ground and Fall debris on the roads. Just before getting back home I started to hear a ticking and after investigation found the noise coming from the air intake behind the passenger door. I am hoping it's just a...
  11. 987 Cayman and Boxster Modifications
    I just purchased a 2006 Cayman S that had a Sharkwerks RS350 kit installed and then removed to facilitate the sale in California. The kit was the intake/tb, intake, Fabspeed Maxflow cat back and the reflash. The PO removed the IPD plenum and GT3 TB and had the ECU reflashed to stock. When I...
  12. 981 DIY Discussion
    Since I did the front side mesh grills I thought I would do the intake mesh grills as well. My goal was to prevent leaves and debris entering the intake. When I took out the stock filters both sides of the housing were filled with leaves and debris. I used the same Homedepot gutter guard...
  13. 987 Cayman and Boxster Chat
    Well, I painted and detailed my BASE 2.9 engine and installed the HIP clear cover, and love it. Now I'm considering painting the intake plenum to match the caps (see below). When I take a look at it, it doesn't look toooo difficult but definitely not the type of job I want to get into and then...
  14. 981 Cayman GT4 Chat
    This will guide you step-by-step through installing BMC intake air filters on your Cayman GT4. The BMC filters decrease resistance to intake flow significantly, improving throttle response and adding a distinctly sporty intake tract growl. BMC are the filters that come standard on the new 991...
  15. 987 Cayman and Boxster Modifications
    I took off the OEM Plenum to paint my intake manifolds with the intakes still in the car. That is I did not disassemble the car. Except I did remove the plenum as shown in the below picture (which is not mine as I borrowed the picture from another post). But for the life of me I catching heck...
  16. Panamera Modifications
    We have been working with international exhaust manufactures and retailers as an OEM manufacturer for several years. “GO-Sheng” is our brand new brand since 2014.The characteristics of GOS system are base on our several years of experience on OEM products. We transforming vehicles and giving...
  17. 981 Cayman and Boxster Modifications
    What it is: K&N or other aftermarket air filter, direct replacement for stock filters. How it is different: Stock filter media is paper, K&N and others (BMC, etc) are oiled cotton gauze media. This means it is a "wet" filter, and it is also washable and reusable, technically never having to be...
  18. 987 Cayman and Boxster Chat
    So a few days ago, I noticed a loud screech while driving my car accompanied with a check engine light. I took my car home and using a code reader, I retrieved two lean codes (P2189 and P2187). Reading through the forums here, it sounded like I might have had the early symptoms of a failed air...
  19. 981 Cayman and Boxster Problems and Complaints
    hello, my cayman gts started making a weird and annoying noise from its left side intake vent. :( its very noticeable and annoying when driving with windows down and only happens between 1k and 4k rpm and it happens every time. i checked the intake fan to see if there is anything stuck on it...
1-19 of 52 Results
Top