Search Results for ‘panel’

The My passenger windows stopped short of full height and then would only go down from there. It won't go up even when I pull on it. I pulled off the door panel and removed the power window motor. Wrapped around the teeth that the window motor mates up with, there is a broken steel cable...

Well, my 2014 CPO CS was gifted with the well known door panel problem. Noticed it Friday and looked at the passenger side and it's also buldged up and starting to let go. At least it is still under Warranty and I'll be calling them tomorrow. I noticed in some post that a new part...

I was eyeing a 718 GTS while my car was in the shop today and I noticed something: the black plastic on the 718 side vents extends out past the painted panel. If your 981 is anything like mine, the outer edge of the body panel next to the vent has been absolutely sandblasted by road debris...

Does anyone know what might be causing my door panel to separate? There does not seem to be any way to snap it back into position.

As you all know, there is a plethora of articles and videos showing how to REMOVE the Cayman's door panel. I followed them to the letter and the panels came off rather easily. But now I can't get them back on the door! And I can't find one article or video that tells how best to reinstall the...

Came up with an idea after getting tired of dressing my cowl panel. I took the whole panel to my LineX professional and got it coated!! Worked out great!!! :banana::banana::banana::dance::dance::dance:

So I was detailing my Boxster, and I find that the door pulls on both doors have gaps. Is this normal? It looks as if the door pull is separating from the door. I've read about panel warping... It doesn't affect operation, but once you see it you can't unsee it. :-( -Matt

I was browsing 981 Boxster trunk capacities and found a reference to the removal of the forward panel in the rear trunk to access more storage space. The poster said the panel was easy to remove and one then had 43 inches of depth by 10 inches high, the added space being underneath the folded...

This is the cover to the rear tail light. On one side the clip that that panel cover goes into to hold it in place is missing. I am not sure where to get the replacement part. I have looked several places but don't see anything that looks like what I am looking for. This is a 2007 Cayman...

On the driver's side rear panel where the seatbelt retracts, I have a rattle. How do you remove this panel?

Hello everyone! I need help please... i just got a 2013 boxster s and the door panel popped out. It's on the top part where the window and the door panel meets. I have tried pushing it down but it won't stay on. Do i have to glue this one down? please help. I will update with photos tomorrow...

I haven't looked closely but looks like roof panel on Cayman bolts onto the car or is that just for roof rack? Has anyone done a Carbon-fiber roof on these cars that replaces steel panel?

I need to get to the gateway connector to install the AIM CAN cable. There are many other wire cables in the way to properly see the gateway wires. The pcar dealer said to remove the left lower dash panel where the ignition and light switches which will make it a lot easier to see the gateway...

I've looked for quite a while and do not see any posts on how to remove the panel containing the cigarette lighter in the 981. Anyone know of a thread or links on how to do this? Based on what I can see and feel after removing a couple of attachment points on the left side, it seems like pulling...

Went with the 911R theme.....for now. Used Avery wrap film "Carmine Red Gloss". Added Carbon Fiber behind the wheels and followed the line around the bumper. This was mostly for protection. I realize this is not a panel that would normally be CF. However, I tried Matte Black and there was just...

Just a thought. I've been experiencing some clattering of the RH seatbelt buckle when the passenger seat is unoccupied, hitting the trim panel aft of the door opening. In my old Miata, they had an elegant solution; said trim panel had a piece of plastic cast into it that the metal extension of...

Has anybody removed the inner door panel from their 981? I have a small crease in the door and I would like to get at it from the inside. I have seen the threads on removing the door panel to get to the speakers etc. But, cant find anything on complete door dis-assembly. Thanks in advance for...

I was making a hard right turn from a traffic light (I was stopped at the light) and I took the corner a little too tightly. It appears that I partially ran over the frozen snowbank. I wasn't expecting damage, but was I wrong. Rocker panel split open and a crack in the quarter panel behind...