Planet-9 Porsche Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 51 Results
  1. Classifieds, Parts, Tools, and Accessories
    This is an aluminum trim kit for a 991/981 (911/Cayman/Boxster). All OEM, removed at 4900 miles and replaced with CF. Includes all pieces shown, removed from a PDK car. $425, Price includes shipping in US, thanks for looking.
  2. 981 DIY Discussion
    With the purchase of my new (used) 2015 Boxster S I had only one major complaint. How do you cure that inevitable rash in the back rear fender wells? We all get it, and short of putting some Clear Bra during new purchase, most will start to go nuts with the chipped, rashed, ground up, and ugh...
  3. 718 Chat
    I know Nick Murray referenced it once, but I wonder if the aluminum trim pieces that are on the dash middle and doors, whether you can get aftermarket or OEM parts to get them in leather? I know you can spec that leather option during a build, but is it possible to buy just the trim parts after...
  4. 987 Cayman and Boxster Chat
    Tried to search on the forum but could not find. Driving in the rain today (first time in a long time), had a little drip coming in from the driver window. Looking at the trim, I noticed the top of the trim piece has a slight tear and is not set firmly against the other trim piece. I suspect...
  5. 981 Cayman and Boxster Modifications
    My used 2015 Cayman GTS came with the black leather/Alcantara interior and the brushed silver dash/door/console trim. I’d like to swap the silver trim for the black brushed aluminum available from Porsche but I’ve been told it’s only available for the dash and console but not the doors. It seems...
  6. 987 Cayman and Boxster Modifications
    Hey Guys, hoping someone has done this, I am trying to remove the black trim pieces on the side of the exhaust pipes. They are inside the painted part of the diffuser, I do see some tabs, two at the top and 2 at the bottom of the pieces. I tried to use a screwdriver to push them in and pull them...
  7. 981 Boxster Spyder Chat
    https://www.suncoastparts.com/product/9X1PLXCT.html Ordered that in my Spyders color and am gonna try to install it myself. Anyone do that by themselves? Seems like the trim should pop out and then the other one should pop in?
  8. 987 Cayman and Boxster Chat
    I am about to convert to a Cargraphic Sport cat-back system. While I am at it thought about replacing the stock trim piece that surrounds the tail pipes with a carbon fiber piece. I saw such a thing while perusing aftermarket suppliers awhile back but can't locate it now. Two Q's: Who is the...
  9. 981 DIY Discussion
    Just ordered and received a pair of the gloss black window triangle trim pieces (and a set of plastic trim removal tools) for 991/981/718: https://www.suncoastparts.com/product/PKBLKTRI.html The description says "installation is simple, easily installed with a trim removal tool and T-20 torx...
  10. 981 Cayman and Boxster Problems and Complaints
    On my front bumper I realized that black plastic that's in the center, on one side only, it's pushed back a bit - i can tell one or two clips on the bottom side of it aren't clipped in, but its also that the trim is pushed back towards the rear of the car. I couldn't readily feel if I could...
  11. 987 Cayman and Boxster Modifications
    Cayman Hatch Trim Removal - Carbon Fiber Spoiler Install Hey Guys, just purchase a carbon fiber rear spoiler for my 2006 Cayman S; still waiting for the spoiler to be delivered. Looking at the measurements, it may fit to the inside of the trunk, before the curved edges that go up the window...
  12. 718 Chat
    Is the standard trim (center console, dashboard, doors) on the 718 plastic or aluminum? If so, did anyone elect to upgrade to brushed aluminum or carbon fiber?
  13. 981 DIY Discussion
    Figured it out on my own. It slides up, but need a 90º pick to release springs. Parts are available separately (surprisingly), but didn't need any. Removed and fixed now.
  14. 718 Chat
    I just installed this today in my 718 cayman - the instructions to get to the engine bay are very similar to this (all the same trim pieces need to come off in the same order, they just look marginally different): https://www.youtube.com/watch?v=czInFGZWo84 Tools needed: Small trim tool (maybe...
  15. 718 Chat
    I purchased a Rennline PM01.04 phone mount that fastens to two screws under the side trim of the console between the seats. I am looking for advice on how to remove this trim piece from a 2017 Cayman. The video on the Rennline site shows that the trim can "popped off" with a single hand by...
  16. 981 Cayman and Boxster Modifications
    I was looking for a phone holder and found this on Amazon. had to trim both sides. http://www.amazon.com/gp/product/B00XIAH3PE/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
  17. 981 Cayman and Boxster Service and Tech
    I was having some minor body work done on the car, and the key came back with the chrome trim broken. I figured this would be a warranty repair, but the dealer says no. $500. It seems to me that the key trim shouldn't break, but the service writer says a defect must be proven. I didn't fight...
  18. 987 Cayman and Boxster Electronics
    After doing a ton of research on various aftermarket radios, I decided the Pioneer AVH-X3800 would suit my needs best. I also bought the install kit. All the wiring worked perfectly, but the unit won't fit in the trim piece opening. I should still be able to use the trim, but with the unit...
  19. 981 Chat
    I've been thinking a nice aluminum trim ring for the gauges in my Cayman would be a nice, classic upgrade. I've searched extensively and can't find a source. Is anyone aware of one? Thanks
  20. 981 DIY Discussion
    Hello all, long time lurker, first time post. I have a 2014 Cayman S that came with the carbon fiber interior package. I am find it darkens up the interior too much and would like to swap it out for silver trim. My question is what is necessary to get all of it out? It looks like the trim...
1-20 of 51 Results
Top