Planet-9 Porsche Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
357 Posts
Discussion Starter #1
Here is the dyno from Vision Motorsports after I replaced the 3.2L with a rebuilt 3.6L from Vision. The 3.6L has 3.8 LN Engineering cylinder heads, stock rods, custom crank from Vision Motorsports and deep sump oil pan. Red lines represent stock power and torque from a generic 3.2L M96, so increase is theoretical and not actual. Blue line is actual results from my engine.

BoxsterDyno20180629.jpg
 
1 - 1 of 1 Posts
Top