[picinkoff]

I have 245/295 setup lowered. Offset very flush and no rubbing, I’m on Apex 601 tires. As good as PS4’s but not as good at the RE71’s
19x8.5 +43
19x10 +25

Really nice setup!
So you've got OZ ULTRALEGGERA HLT:
19x8.5 offset +43 with 245/40-19
19x10 offset +25 with 285/35-19

Are those numbers correct??

Are you using any wheel spacers?

I was looking at the Matt Bronze of Gold for my CS.

Thanks, Paul.

 

[picinkoff]

pinincoff- If you have custom LCA's to give more camber to reduce outside tire shoulder wear, you will need to add the shim dimensions to the wheel spacer for the correct track width on each axel. Not including this measurement could give more track than you want, resulting in tire rub on the fender arch. This is only if you have aftermarket LCA's.

Thanks Apex1! My CS is stock. I was just curious what it would take to replicate the stance of Porsche08 CS.

 

[picinkoff]

The spacers should do the trick. Honestly a 245/275 setup works really perfect on these. 285 wasn’t much better, just looks a little girthy. Does that help?
as for camber, my rears are 2.5 neg, the fronts aren’t enough 😂. Like apex said if you need sufficient track camber you’ll need the GT3 LCA’s. That will allow more camber adjustment AND you could run a 9” 255 tire, otherwise without the LCA’s it’ll stick out… so if the 245 on an 8.5 suits you… helping? I have a 997 with same wheels and sometimes I get goofed up.
Recap:
19x8.5 +49 offset with 5mm spacer (also run just 3mm sometimes)
19x10 +40 offset with 15mm spacer
Tires : 245/35/19
285/35/19
If you ran 295, you’d have to drop sidewall 5mm ex: 40 to 35
Spacers: for every mm of spacer you need mm of stud…

Awesome. Thank you so much for the detailed information!!!