Planet-9 Porsche Forum banner

Status
Not open for further replies.
1 - 20 of 1279 Posts

·
Banned
Joined
·
3,496 Posts
Discussion Starter #1 (Edited)
I have a set of the original Motor Lux CF side vents that Ken did a great install article on Carbon Fiber Side Intakes - Articles

Motor lux sold them for $550.00 in all CF ,I dont know what it will cost us but the more people we get the lower the price will be .Please Post ASAP if interested ,we can get these made for production within weeks .Thanks
see attached pics of kens car,last pic is them on my car :)
 

·
Registered
Joined
·
664 Posts
I would prefer a non- CF so I would be.
 

·
Registered
Joined
·
18 Posts
I think Neal could do a all CF and a fiberglass version using the same mold and the cost should be less for the fiberglass:)
1. ReconTrojan
2. sanche60
anyone interested please add you name to the list .Thanks
 

·
Premium Member
Joined
·
464 Posts
Might be interested in the non-CF variety depending on price.

1. ReconTrojan
2. sanche60
3. halfbreeded
4. bretster (maybe)
 

·
Premium Member
Joined
·
3,552 Posts
maybe have josephdesimone (sp?) have some made up at the fabricator that's doing his LED light spears? I'd prefer plastic over fiberglass.
 

·
Premium Member
Joined
·
4,144 Posts
5. Owen Birch (non-CF if about $200 or less) or CF if Prodgers won't sell!
Added my name and cleaned up list:

1. ReconTrojan (non-CF preferred)
2. sanche60
3. halfbreeded
4. bretster (maybe)
5. Owen Birch (non-CF if about $200 or less)
6. rubber_ducky (prefer plastic over fibreglass)
7. gtscayman (non-CF preferred, but would consider CF)
 

·
Banned
Joined
·
3,496 Posts
Discussion Starter #12 (Edited)
maybe have josephdesimone (sp?) have some made up at the fabricator that's doing his LED light spears? I'd prefer plastic over fiberglass.
at this point we want to see if there is enough interest Sounds like a fiberglass version would be the least expensive but black plastic would be cool!
 

·
Registered
Joined
·
76 Posts
I'd also be interested depending on the price, too.

Thanks,
Jon
 

·
Registered
Joined
·
11 Posts
Im in

1. ReconTrojan (non-CF preferred)
2. sanche60
3. halfbreeded
4. bretster (maybe)
5. Owen Birch (non-CF if about $200 or less)
6. rubber_ducky (prefer plastic over fibreglass)
7. gtscayman (non-CF preferred, but would consider CF)
8. Dezmo(non cf, would consider cf)
 

·
Banned
Joined
·
3,496 Posts
Discussion Starter #20
so so far we have an interest list of
1. ReconTrojan (non-CF preferred)
2. sanche60
3. halfbreeded
4. bretster (maybe)
5. Owen Birch (non-CF if about $200 or less)
6. rubber_ducky (prefer plastic over fibreglass)
7. gtscayman (non-CF preferred, but would consider CF)
8. Dezmo(non cf, would consider cf)
9. chilidog
10.raydef
11.shifterkartracer

looks like most are looking for something pretty affordable and plastic .
lets keep the list going ,the more people that are interested the more likely we can get this project completed and for a lower amount .
I will call neal tomorrow and get an idea of the type of material and price he can offer ;)
 
1 - 20 of 1279 Posts
Status
Not open for further replies.
Top