Planet-9 Porsche Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter · #1 ·
I am deciding on dedicated track wheels. I am considering BBS GT RS, CCW, Champion RG5's. Am going to go with 18 in wheels and probably 8.5F 10R. Probably going to go with 245F 275R. Was looking at some HRE wheels and they apparently will custom build to whatever offset you want. I see that many are using 15 and 7 mm spacers to get the wheel a bit closer to the fender edge. What offset would I need if I could order the offset in any amout and allow the wheels to reach the fender without using spacers? Is that even possible?

TIA
 

·
Registered
Joined
·
1,695 Posts
I'm running 8.5x19 with 50 mm and 245s and 10x19 with 43 mm and 275s with no spacers. Picture angles might be deceiving but the general consensus is they are just right.
 

·
Registered
Joined
·
98 Posts
I am happy to help you spec out a set of wheels for your Cayman. Please call me when you have a moment.

I am deciding on dedicated track wheels. I am considering BBS GT RS, CCW, Champion RG5's. Am going to go with 18 in wheels and probably 8.5F 10R. Probably going to go with 245F 275R. Was looking at some HRE wheels and they apparently will custom build to whatever offset you want. I see that many are using 15 and 7 mm spacers to get the wheel a bit closer to the fender edge. What offset would I need if I could order the offset in any amout and allow the wheels to reach the fender without using spacers? Is that even possible?

TIA
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top