Planet-9 Porsche Forum banner
1 - 15 of 15 Posts

·
Registered
Joined
·
1,395 Posts
Discussion Starter · #1 ·
CampioniShop presented Forgestar and IForged wheels to the community about 2 months ago with an introdution GB. The first sets of this GB are currently being delivered and are being mounted on fellow planet-9ers.

This thread is dedicated to all current Forgestar/IForged/CampioniShop customers to post pictures of their Forgestar wheels and for members to enjoy :)

About Forgestar:

With over 30 years of combined experience in the automotive wheel industry Forgestar Performance Wheels has bridged the gap between forged wheels and cast wheels. Forgestar Performance Wheels is proud to introduce the world's first one piece lightweight custom flow formed wheel lineup.

Flow Forming is a production procedure that turns the wheel (or rim section) over a special mandrel and three hydraulic rollers using tremendous pressure. The pressure and turning then force the rim area to form against the mandrel, creating the shape and width of the rim. During Flow Forming, the rim actually "flows" down to create the full rim width. During Flow Forming, pressure applied to the cast rim actually changes its mechanical properties, so its strength and impact values become similar to those of a forged rim. That translates to up to 15% less weight when compared to a standard cast wheel. Our technological breakthroughs in heat treating allow us to increase dent resistance without having to make the wheel heavier.

Forgestar Performance Wheels proprietary Flow Forming technology allows the customers to choose between a range of offsets for every wheel width that is offered. The end consumer is able to choose a wheel that will perfectly fit their own individual vehicle. All Forgestar Performance Wheels are compatible with tire pressure sensor monitors and allow clearance for most high performance brake caliper upgrades.


About IForged:

iForged is a full service fabrication and custom wheel design facility. Several of our patented wheel designs are on the road today. All iForged wheels are custom fabricated for your vehicle and available in a variety of sizes and custom finishes. Our 30 plus years in the automotive wheel industry separate us from the ordinary.

iForged wheels are among the strongest, lightest, fastest wheels available for cars like Porsche, BMW, Audi, Ferrari, Lamborghini, Jaguar, Lexus, Mercedes, Corvette, Viper and more. iForged USA also specializes in custom offsets and custom lips sizes for most widebody conversions.
 

·
Registered
Joined
·
1,395 Posts
Discussion Starter · #11 ·
Matt,

What are the offsets for the black CS with the 19" gunmetal F14s?

Thanks.
Scott did not order from us, he ordered before the GB and sales thread.

Standard offsets are:
1X x 8.5 +45mm
1X x 10 +38mm

If you are lowered you can go down to a +30 to 33 at the rear and a +42 at the front.
 

·
Registered
Joined
·
12 Posts
Matt,

Thanks for the response. I am planning to lower and want the wheel stance as wide as possible without going beyond the fender. Going from a +38mm to +33mm in the rear, does this move the wheel out or in on the fender for the 19x10s? Thanks.
 
1 - 15 of 15 Posts
Top