[[email protected]]

What coilovers?

These are MacPherson strut cars all around so the motion ratio is very close to 1:1. Measure your current ride height and make the needed changes to achieve your desired appearance. I would not go lower than 25mm front or rear. If you rake the car you'll lose caster (not great).

 

[[email protected]]

I don't know anything about Feal coilovers, but if they lower a minimum of 1" (25.4mm) that is a bit concerning.. Keep it in the 1" or higher range or you'll start running into some serious geometry problems with bump steer and roll center.

Regarding height it depends where you are measure. The wheel arches are asymmetric but if you like the stance now just make a relative change.